Clipsal Power Inlet/Outlet Backing Plate - Pre-2006 Corner Steadies & Drop Down Legs Switched 12 V output for

Switched 12 V output for an optional step light (not supplied)

Available for either left-hand or right-hand hinged doors (hinge side when facing the door from the outside)

it eliminates the rafter binding during setup and storage

these steadies have a quick release handle to lower down the leg and the same standard 17-mm hex drive for smooth height adjustments up to 840 mm

Clipsal Power Inlet/Outlet Backing Plate - Pre-2006 Corner Steadies & Drop Down Legs Switched 12 V output forDescription: Power inlet outlet backing plate, pre 2006, Clipsal. These are required when the RV wall thickness will not fully accommodate the rear section of the power inlet or outlet. They simply give extra space. Features: This style is suitable only for the old style inlets and outlets by Clipsal (pre 2006). 13 mm thick. They cover 77 mm wide x 90 mm. Screw holes are around 55 mm horizontally and 70 mm vertically. 1 year warranty.