1-1/2" PVC Push Point Compression Points As the shafts are extracted

As the shafts are extracted the tape or line is pulled into the hole which can then be attached to the microduct and installed

This is an extremely stiff and durable custom made brush that will clean the hardest and most stubborn soil deposits that might stick to the inside of the female threads on any of our shafts or components that have a female threads

NOTE: This part is rarely used but in the case of pockets of gravel or roots pushing back into the hole

without removing the point

1-1/2" PVC Push Point Compression Points As the shafts are extractedThis part is used to insert a 1 1 2" PVC Sch 40 pipe into the ground after the initial hole is opened with the compression point. It is threaded into the end of a 2 sch 40 PVC pipe or conduit. As it is screwed into the pipe it cuts its own threads on the inside of the pipe much like a tap. The outside diameter of the push point will be the same as the outside diameter of the pipe itself. Next this pipe point assembly is shoved into the same opening